RMS offers a wide range of secondary processes to provide you with the product at the level of completion desired. This ultimately means a completed device that is packaged, labeled, sterilized and ready for finished stock.
Finishing
- Tumbling (vibratory, centrifugal & disc)
- Chemical deburring (Titanium & SS)
- Micro blasting
- Bead blasting
- Manual polishing (including Cobalt Chrome)
Fully Automated Passivation System
- Programmable to different ASTM & customer specs
- Router bar code directly controls system process
- Automated basket movement through up to 13 stations
| 1 | Load |
| 2 | Clean w/ultrasonics |
| 3-4 | Rinses w/ultrasonics |
| 5 | Nitric acid w/ultrasonics |
| 6 | Hot nitric acid w/ultrasonics |
| 7-8 | Nitric acid & sodium dichromate |
| 9-10 | Rinses w/ultrasonics |
| 11 | Hot D.I. rinse |
| 12 | Hot air dryer |
| 13 | Vacuum dryer |
- All tanks with recirculation filters
Precision Cleaning
- Aqueous cleaners
- Ultrasonics
- Vapor degreaser
- R.O. / D.I. system for high purity water
Final Cleaning
- Validated system in Class 100,000 Clean Room
- Polishing filters generate ultra high purity water
- Constant recirculation retains high m-ohm values